Cleaning bowling shoes may not be the easiest of tasks, but it can be done with relative ease and will make your shoes last much longer than if you never cleaned them. Suppose you want to clean bowling shoes with the minimum effort possible.

In that case, this article is perfect for you because it takes only one or two minutes to complete the process!

This short but incredibly informative article will teach you how to clean bowling shoes to look almost as good as new! Without further delay, let’s get started!

Are Bowling Shoes Clean?

The shoes are cleaned to make out of a different material that is like hard plastic. This material is elementary to clean and does not absorb any stains or get dirty quickly. That is why the shoes are considered to be clean.

5 Methods On How To Clean Bowling Shoes At Home?

Bowling shoes are some of the essential accessories a bowler may own. The shoes are what we keep a close eye on. After all, clean bowling shoes can help us do better at the lanes. If there is one accessory that you will want to take extra good care of, it should be your bowling shoes. Here are 6 methods on how to clean bowling shoes at home.

Method 1: Try Soap And Water

Step 1: Start with a damp cloth and some hot water, along with mild dish soap. You can also use a clean bucket if it’s easier to submerge your shoes in the water there.

Step 2: Use the cloth to get rid of any dirt or debris, moving in small circles until you’ve covered all areas of the bowling shoe.

Step 3: Next, get another clean cloth and rinse any soapy residue. Dry your shoes with a dry towel after, taking care to remove as much moisture as possible from the inside. This part is essential!

Method 2: Use A Lemon To Remove Bad Odors

  1. Get a lemon and cut it in half.
  2. Squeeze the lemon juice on the inside of the shoes.
  3. Using a paper towel, wipe the inside of the shoe using the lemon juice.
  4. Let the shoe air dry for at least 3 hours.
  5. Use a scrub brush to remove any remaining dirt or stains from your bowling shoes.

Method 3: Remove Odors With A Shoe Deodorizer

Step 1: Purchase a shoe deodorizer.

Step 2: Remove the insoles from the shoe.

Step 3: Place the deodorizer in the shoe overnight.

Step 4: In the morning, remove the deodorizer and replace the insoles.

Method 4: Clean The Shoes Using Vinegar And Baking Soda

Step 1: Wipe the shoes with a clean cloth.

Step 2: Mix baking soda and vinegar.

Step 3: Apply the mixture to the shoes.

Step 4: Leave it for 30 minutes.

Step 5: Wipe the shoes with a clean cloth to remove vinegar stains.

Method 5: Use Rubbing Alcohol To Clean The Shoes

Step 1: Take a paper towel or rag and wipe off any excess dirt or dust from the shoes.

Step 2: Now, take some rubbing alcohol, preferably 70% concentration, in a spray bottle and spray it on the stained area of the shoe.

Step 3: Let the rubbing alcohol remain on the shoe for at least 30 seconds to one minute.

Step 4: Take a clean cloth or rag and rub the area in circular motions so that the alcohol penetrates deep into the material of the shoe.

Step 5: Repeat this process until you see visible results.

Method 6: Cleaning With Bleach Solution

  1. Mix ½ cup of bleach with 1 gallon of water in a large bucket, then use a clean cloth to soak up the solution and scrub the outside, inside, and bottom of your bowling shoes.
  2. Repeat this for both shoes.
  3. Then, rinse both shoes with clean water to remove any remaining bleach residue.
  4. Allow both shoes to air dry completely before using them again.

Method 7: Using White Petroleum Jelly On Bowling Shoes

Another effective way to clean your bowling shoes is by using white petroleum jelly. This method is more effective for cleaning the leather than other methods.

Step 1: Take a Clean Cloth

Take a clean cloth and soak it in warm water. Squeeze out the excess water from the cloth.

Step 2: Wipe Down The Shoes

Once you have taken the wet cloth, wipe down the soles and the inside of your bowling shoes. Make sure to cover all areas of the shoes with this wet cloth.

Step 3: Use White Petroleum Jelly

Take some white petroleum jelly on your hand and spread it on the dirty areas of your shoe. Make sure that you are spreading it all over the shoe and perfectly covering all of its dirty parts.

Step 4: Leave It For 10 Minutes

Let this jelly sit on your shoes for about 10 minutes to settle down properly and start working. You can also leave it for a more extended period if you want or feel like doing so. While doing so, remember that you have to finish this process before you go bowling, as leaving petroleum jelly for a long time will make it difficult for you to play after some time.

How To Maintain Bowling Shoes? 

  1. Clean and dry the shoes after every use, even if they only look dirty.
  2. Wipe down the soles of the shoes with a damp cloth to remove any dirt and debris.
  3. Scrub the shoes gently with a soft brush or old toothbrush to remove any built-up dirt from the outside of the shoe and the bottom of the sole.
  4. Dry off your bowling shoes again with a clean microfiber towel or shoe tree to prevent mold or mildew from developing on the leather.
  5. Remove the inner sole of your bowling shoes and set them aside for washing later if it has become dirty or smelly.
  6. Brush away any dust or dirt from the inside of your bowling shoe, paying particular attention to the heel area where most dirt will accumulate.
  7. Remove any stubborn stains using a leather cleaner approved for use on leather footwear to avoid further damaging your shoes.

10 Reasons Why Wear Bowling Shoes?

  1. Bowling Shoes Protect Your Bowling Feet
  2. Bowling Shoes Protect Your Bowling Lanes
  3. Bowling shoes give you a competitive edge
  4. Bowling Shoes Are Easy to Find
  5. Bowling shoes add to your bowling experience
  6. You Can Bowl in Comfort In Your Bowling Shoes
  7. Bowling Shoes Make Good Footwear
  8. Get Better Performance
  9. To avoid Feet Problems
  10. To avoid Shifting the Bowling Ball

Read Next: 

Common Questions About How To Clean Bowling Shoes

How To Clean Bowling Shoes Slide Strip?

Bowling shoes need to be clean and dry before storage. To clean the shoes, use a mild soap (like Woolite) and a toothbrush or an old toothbrush to scrub the tongue and the inside of the shoe, which are the dirtiest areas. Rinse the shoes with clean water and dry with a towel. Shoes should be air-dried on a rack or a non-humid area.

How To Clean The Bottom Of Bowling Shoes?

Bowling shoe bottoms are very delicate. It would be best to clean them regularly so that the bottom does not wear out and get hurt. To clean the bottoms, you need to use certain products. You can use bleach, mouthwash, water, and toothpaste to clean these shoes.

Cleaning the Shoe with Bleach Bleach will clean the bottom of your shoe and helps to remove the stains. Take a bowl of water and add 1/2 teaspoon of bleach to it. (You can add more bleach, depending on how dirty the shoe is.) After that, soak a sponge in the solution and brush the entire shoe with it. Then, rinse your shoe with water.

Can You Wash Bowling Shoes In The Washer?

Yes, you can wash bowling shoes in the washer. Put your shoes in a pillowcase, tie them up, and throw it in with your whites. Use the delicate cycle and cold water. Let them air dry outside or in the dryer on low heat. I hope this was helpful!

Concluding About How To Clean Bowling Shoes

Cleaning bowling shoes is a simple, fast, and easy process. When you are using the proper methods, it will not be a complex or complicated task.

I hope this article will help you solve the problem of cleaning your bowling shoes.

Usman Ali

Hey, My Dear Visitors! I hope you are enjoying my content. As an expert in the shoe niche, my priority is to provide valuable content. Our guides and How-to articles are written after highly researched so that you can trust our content.

Similar Posts

Leave a Reply